OBD Hero Logo
OBDHERO
Error Code Guide
P0002
Low Severity

Fuel Volume Regulator Control Circuit Range/Performance

Don't ignore this warning! Complete diagnostic guide to understand, diagnose, and fix this trouble code.

Step-by-step guide
Repair cost estimates

What does P0002 mean?

Expert Guide

Understanding OBD2 Error Code P0002

The OBD2 error code P0002 stands for Fuel Volume Regulator Control Circuit Range/Performance. This code is part of the powertrain diagnostic trouble codes, which indicate issues affecting the engine or transmission performance. When the Engine Control Module (ECM) detects a fault within the fuel volume regulator system, it triggers this code, signaling that the fuel delivery system is not performing as expected.

Check Another Code

P

Common Causes of P0002

Several issues can lead to the P0002 error code, including:

  • Faulty Fuel Volume Regulator: The regulator itself may be malfunctioning, causing an improper fuel volume to be delivered.
  • Wiring Issues: Damaged or corroded wiring and connectors in the fuel volume regulator circuit can disrupt communication.
  • ECM Malfunction: A failure in the engine control module can lead to incorrect readings or control signals.
  • Clogged Fuel Filter: A clogged filter can restrict fuel flow, impacting the regulator's ability to maintain proper fuel volume.
  • Pump Issues: A failing fuel pump may not provide sufficient fuel pressure needed for proper operation.

Step-by-Step Diagnostic Procedure

Follow these steps to diagnose the P0002 code:

  1. Use an OBD2 scanner to confirm the presence of the P0002 code.
  2. Check for any additional codes that may provide more context.
  3. Inspect the fuel volume regulator and associated wiring for visible damage.
  4. Test the voltage and ground supply to the fuel volume regulator using a multimeter.
  5. Perform a fuel pressure test to ensure the pump is delivering adequate fuel pressure.
  6. Examine the fuel filter and replace it if clogged or dirty.
  7. If all components test fine, consider testing or replacing the ECM.

Repair Options and Estimated Costs

Repairing the P0002 code may vary in cost depending on the diagnosis:

  • Fuel Volume Regulator Replacement: $200 - $600
  • Wiring Repairs: $100 - $300
  • Fuel Pump Replacement: $300 - $800
  • Fuel Filter Replacement: $50 - $150
  • ECM Replacement: $500 - $1,500

Can the Vehicle Be Driven Safely?

Driving with a P0002 code is not recommended. While you may notice no immediate symptoms, the underlying issue can lead to poor engine performance, reduced fuel efficiency, or even a complete engine failure if left unaddressed. It's best to have the vehicle diagnosed and repaired promptly to ensure safe and reliable operation.

Common SymptomsWatch out for these warning signs

  • Check Engine Light (CEL) illuminated
  • Malfunction Indicator Lamp (MIL) on
  • Poor fuel economy
  • Engine running rough or hesitating
  • Difficulty starting the engine
  • Reduced engine performance

Possible CausesDiagnose from most to least common

  • 1Open or short in wiring harness
  • 2Poor electrical connection
  • 3Damaged wiring insulation
  • 4Faulty ground connection
  • 5Component not operating within expected range
  • 6Mechanical wear or damage
  • 7Contamination affecting operation
  • 8Clogged or dirty fuel injectors